How to Draw a Layout of Your Kitchen Counters
The days of free home estimates are long gone, thanks to the high cost of transport. If you are installing granite work tops, most manufacturers now ask for a layout of your existing counter for a free phone or e-mail estimate. Draw your kitchen counters May seem complicated, but with these tips, your layout will be ready in the shortest possible time.
Start by drawing your counter so simple rectangles and squares. Plotting paper works best, but a clean sheet printer paper is well in a Prize. The layout does not need to scale, but try to the right proportions. Sketch each counter, including the islands, peninsulas, bar tops and ledges. Enter the placement of your devices with clear words. This will help you keep track of your measurements and gives the processor a visual representation of your kitchen.
Mark the sink as a rounded rectangle. With laminate counter, the sink is from above. Visitors granite counters, you can choose between top-mount assembly and under the sink. Under mount sinks require a polished cutout implies that the pattern and color of the granite. Since sinks are available in a variety of sizes, shapes and styles, most sinks a template for the cutout. For the purposes of your drawing, size and form no part to play, but you should indicate, top-mount or mount.
Most kitchens have a back splash, a section of granite that lines the wall behind the sink. Four-inches tall backsplashes are the most common, but several options are available. Some homeowners for full backsplashes, the wall of the counter to the overhead cabinets and other elects not that a back splash at all. Backsplashes have a practical purpose than to protect the walls of water or the wall roughness.
Backsplashes are generally installed where the counter is a wall, but they should not against the devices or wooden panels. The easiest way to indicate backsplashes on your layout is on a narrow rectangle along each counter. If you're not sure, the back splash option is best for your kitchen, contact your manufacturer for the price of several options.
If your kitchen has a cooking surface (as opposed to a stand-alone oven), Mark with his position a rectangle marked. Due to the size of the hole, cooking surface cuttings are usually produced on site.
Finally, select the finished edges with an "X" Since granite is a solid surface, profiles can be carved along the edges exposed. Granite processors can produce a series of edge profiles, which range in price. Mark all the edges that are to be suspended, except edges, where the counter party meets on a device.
Make sure information about your options: granite color, size back splash (4 ", full, or none), and finished the edge profile. These decisions are necessary to ensure an accurate estimate. Also your contact information, including your full name , Address, telephone number and e-mail address.
That's it! Before your layout to the manufacturer, you must make some measurements. A tape measure works best, and it may help to have a friend in order to keep the other End.
Author:Maryla Bosh
The owner of Fortune Estates, Inc. Direct importer and fabricator of granite and marble from across the globe. Headquartered in Melrose Park, Illinois but serving continental US and Canada with residential and commercial granite and marble projects. Fortune Estates offers solid knowledge about natural stone, experience, detailed craftsmanship and the most competitive prices in the industry.
http://www.FactoryPlaza.com
Article Source: http://EzineArticles.com/?expert=Maryla_Bosh